Connecting your DAQstuff to the world          DAQstuff Online

Automotive Distribution

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Current Shunts Automotive - PAT

   d-400116 $19.95     AUTOMOTIVE 5 Volt 2 Amp Switching Power Supply with USB Power - PANEL MOUNT
   d-400116-dr $24.95     AUTOMOTIVE 5 Volt 2 Amp Switching Power Supply with USB Power & DIN RAIL Mounts

Easy Connect & Disconnect.          +5vdc 2 Amp Switcher

                                 

If you need to charge your 5 volt  Electronic accessory on your 12v vehicle,this is the Switching Power Supply that you want.

What makes this Automotive Switching Power Supply great is it's wide range of input voltages while maintaining a steady +5vdc @ 2 amps.   You can plug up to 2 USB Cables into the USB Connector or tap the +5vdc power on the screw terminal.  This unit has excellent transient protection for your electronics because the output +5vdc is totally isolated from the input.  The result is that any voltage spike remains isolated from the input.  The chasis ground of the input is not connected to the ground of the output. 

Both input and output are fused with ATC fuses. 

( This unit comes in 2 mounting configurations, Din Rail Mount and Panel Mount.  The panel mount includes Qty 4 standoffs, Qty 4 4-40 3/4" screws and Qty 4 hex nuts.  The Din Rail Mount comes with 2 Din Rail Mount adapters for easy Din Rail Installation. )

                     
  USE IT IN YOUR   USE IT FOR YOUR   Quick and Easy to Install  
  RV     Cell Phone         Switcher Power Supply  
  Car     GPS            
  ATV     IPOD         10-18 vdc @ 1.1 amp Input  
  Motorcycle   Radio         to 5 vdc 2 amp Output  
  Boat     Camera            
  Snowmobile                
                     

 

                                 


Features of the TYCO MA010-Series Power Module   
 
Small size: 50.8 mm x 40.6 mm x 12.7 mm
(2.00 in. x 1.60 in. x 0.50 in.)
Output current limiting
High efficiency: 78%84% typical
Output overvoltage clamp
Input-to-output isolation
No external filtering required
Operating ambient temperature range: 10 C to +50 C, no derating
No heat sink required
Meets FCC Class A requirements
High reliability
UL* Recognized, CSA Certified, and VDE Licensed
 
The MA010-Series Power Modules use advanced, surface-mount
technology and deliver high-quality, compact, dc-dc conversion
at an economical price.

SWITCHER POWER SUPPLY      # d-400116
 
      MA010A DC-DC Power Module      
                   
      It uses qty 2 - 3 amp Fuses,  1 in and 1 out.        
                   
      10 - 18 vdc  @ 1.1 amp Input  to  5 vdc 2 amp Output.      
                   
      The USB connector only has +5 vdc and ground connected, this allows a standard USB cable to be used for charging your 5 volt devices.      
           
           
                   
                   
      12 volt in      5 volt out      
  Screw Terminal  
   
  FUSE OUT OUT +5V IN +12V IN GND OUT DGND USB  
  FUSE IN      
| | | | | |
| | | | | |
FUSE IN
3 amp ATC
Goes to Elec from + side from - side  Output GND Plug In and charge USB Devices here
Device such  (positive) of (negative) of ISOLATED
as Cell Phone your Battery your Battery from Input
IPOD, GPS     GND
   
FUSE OUT 
3 amp ATC
 





MOUNTING HOLES for 5 Volt Switching Power Supply
From Center of hole to Center of hole is 2.412 inches
                       
   
                           
    MA010A DC-DC Power Module O  
O   From Center of hole to Center of hole is .987 inches
   
   
O O  
   
   
O O    
 
  Screw Terminal  
  FUSE OUT OUT +5V IN +12V IN GND OUT DGND USB  
    FUSE IN        

For a complete PDF on the TYCO MA010-Series Power Module, click here   

 

 

                                 

 

DAQstuff.com

 

To view your cart - Click below

 

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Phoenix Contact NI Components